The surface grinder is mainly used to grind the workpiece by grinding wheel rotation so that it can achieve the required flatness. According to the shape of the table, it can be divided into a rectangular table, a round table and two surface grinders. The diameter of the surface grinder table is the main parameter of the width and length of the rectangle. In the specific course of action, 7 major structures of the surface grinder are given special attention.

1。 The positioning rule is surface grinder

Where should the machine tool be placed and how best to install it? It is reported that the reserved space of 300 mm should be in the maximum movement, and each foot screw is tight, showing around

2。 Selection of surface grinding wheel

The selected speed must be able to withstand a turnover of 2000 m / min more than 0.04/1000 mm. (the installation of the inverter needs to be higher) because if the speed is too low, it is easy to leave traces. However, if the speed is too high, the price of the wheel is much higher. Special attention should be paid to the use of damaged wheels. If so, it will also be installed after the new grinding rim must be balanced.

3. Before the main shaft of the grinder, ensure that the main shaft is clockwise.

4. Hydraulic device of surface grinder

The hydraulic oil used in the surface grinding machine has a viscosity of 46. A new machine for cleaning the fuel tank after three months and one year of hydraulic oil replacement.

5. Surface grinder lubrication equipment

Guide the viscosity of lubricants for the 32nd lubricating oil. (we recommend Vectra page 1 or Lane 8 1405) to confirm the oil in the fuel tank (pool) and ensure that every day in the above line. The inspection is to open the railway line every week and eliminate the railway oil transportation. The oil tank shall be cleaned once every three months. Add grease regularly as required.

6. Left grinding mechanism

Prohibited sports and travel tables. When the meter cable is loose, it shall be adjusted immediately.

7. Surface grinder washing and cleaning.

Dust container filter cleaning and maintenance, which is the best cleaning every two weeks. Yes, check the coolant. If the coolant is polluted, check it and remove it in time.